FREE PDF 2025 FORTINET HIGH-QUALITY LATEST NSE8_812 DUMPS FREE

Free PDF 2025 Fortinet High-quality Latest NSE8_812 Dumps Free

Free PDF 2025 Fortinet High-quality Latest NSE8_812 Dumps Free

Blog Article

Tags: Latest NSE8_812 Dumps Free, NSE8_812 Valid Exam Notes, NSE8_812 Valid Test Bootcamp, New NSE8_812 Mock Exam, NSE8_812 Reliable Exam Tips

You can use this Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) version on any operating system, and this software is accessible through any browser like Opera, Safari, Chrome, Firefox, and IE. You can easily assess yourself with the help of our Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) practice software, as it records all your previous results for future use. You can easily judge whether you can pass Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) on the first attempt or not, and if you don’t, you can use this software to strengthen your preparation.

The NSE8_812 exam is an eight-hour, open-book exam that consists of 60 multiple-choice questions. NSE8_812 exam covers a wide range of topics, including network design, security protocols, VPN technologies, firewall policies, and advanced threat protection. To pass the exam, candidates must score at least 70% on each section of the exam. In addition, candidates must have at least five years of experience in the network security field and hold the Fortinet NSE 7 certification.

Fortinet NSE8_812 is a certification exam that validates the knowledge and skills of networking professionals in designing, deploying, configuring, and maintaining advanced security solutions using Fortinet security products. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam is designed for experienced network security professionals who have a deep understanding of the Fortinet security solutions and possess advanced level knowledge of network architecture and security protocols.

>> Latest NSE8_812 Dumps Free <<

2025 Fortinet Latest NSE8_812 Dumps Free Pass Guaranteed Quiz

Some of our new customers will suppose that it will cost a few days to send them our NSE8_812 exam questions after their purchase. But in fact, only in 5 to 10 minutes after payment, you can use NSE8_812 preparation materials very fluently. We know you are very busy, so we will not waste any extra time. In this fast-paced society, you must cherish every minute. Using NSE8_812 training quiz is really your most efficient choice.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q36-Q41):

NEW QUESTION # 36
Refer to the exhibit, which shows a VPN topology.

The device IP 10.1.100.40 downloads a file from the FTP server IP 192.168.4.50 Referring to the exhibit, what will be the traffic flow behavior if ADVPN is configured in this environment?

  • A. Spoke1 will establish an ADVPN shortcut to Spoke2
  • B. ADVPN is not supported when spokes are behind NAT
  • C. All the session traffic will pass through the Hub
  • D. The TCP port 21 must be allowed on the NAT Device2

Answer: A

Explanation:
D is correct because Spoke1 will establish an ADVPN shortcut to Spoke2 when it detects that there is a demand for traffic between them. This is explained in the Fortinet Community article on Technical Tip: Fortinet Auto Discovery VPN (ADVPN) under Summary - ADVPN sequence of events. References: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Fortinet-Auto-Discovery-VPN-ADVPN/ta-p/195698


NEW QUESTION # 37
Refer to the exhibit.

A FortiWeb appliance is configured for load balancing web sessions to internal web servers. The Server Pool is configured as shown in the exhibit.
How will the sessions be load balanced between server 1 and server 2 during normal operation?

  • A. Server 1 will receive 20% of the sessions, Server 2 will receive 66.6% of the sessions
  • B. Server 1 will receive 25% of the sessions, Server 2 will receive 75% of the sessions
  • C. Server 1 will receive 0% of the sessions Server 2 will receive 100% of the sessions
  • D. Server 1 will receive 33.3% of the sessions, Server 2 will receive 66 6% of the sessions

Answer: C

Explanation:
D is correct because server 1 has a weight of 0, which means it will not receive any sessions from the load balancer. Server 2 has a weight of 100, which means it will receive all sessions from the load balancer. This is explained in the FortiWeb Administration Guide under Server Load Balancing > Server pools > Weighted round robin. Reference: https://docs.fortinet.com/document/fortiweb/6.3.0/administration-guide/381057/server-load-balancing https://docs.fortinet.com/document/fortiweb/6.3.0/administration-guide/381057/server-load-balancing/381058/server-pools


NEW QUESTION # 38
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:
The OSPF configuration shown in the exhibit is using the default priority value of 1 for the interface port1. This means that FGT_3 will participate in the DR/BDR election process with the other OSPF routers on the same LAN segment. However, this is not desirable because FGT_3 is a new device that needs to be added to the OSPF network without affecting the existing DR/BDR election. Therefore, to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election, the priority value of the interface port1 should be changed to 0. This will prevent FGT_3 from becoming a DR or BDR and allow it to form OSPF adjacencies with the current DR and BDR. Option B shows the correct configuration that changes the priority value to 0. Option A is incorrect because it does not change the priority value. Option C is incorrect because it changes the network type to point-to-point, which is not suitable for a LAN segment with multiple OSPF routers. Option D is incorrect because it changes the area ID to 0.0.0.1, which does not match the area ID of the other OSPF routers on the same LAN segment. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/358640/basic-ospf-example


NEW QUESTION # 39
You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)

  • A. disable on the ISL and FortiLink trunks
  • B. enable on ICL trunks
  • C. enable on the ISL and FortiLink trunks
  • D. disable on ICL trunks

Answer: A,D

Explanation:
A is correct because disabling igmps-flood-traffic and igmps-flood-report on ICL trunks prevents unnecessary multicast traffic from being flooded across the MCLAG cluster members. C is correct because disabling igmps-flood-traffic and igmps-flood-report on the ISL and FortiLink trunks prevents unnecessary multicast traffic from being flooded to other switches or FortiGates that do not have multicast listeners. Reference: https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding/381058/configuring-multicast-forwarding


NEW QUESTION # 40
Refer to the exhibit containing the configuration snippets from the FortiGate. Customer requirements:

* SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)
* Public IP address (129.11.1.100) is assigned to portl
* Datacenter.acmecorp.com resolves to the public IP address assigned to portl The customer has a Let's Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.
Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?
A)

B)

C)

  • A. Option B
  • B. Option A
  • C. Option C
  • D. Option D

Answer: C

Explanation:
To resolve the issue of failing to renew the Let's Encrypt certificate, the configuration change that is needed is to enable the HTTP-to-HTTPS redirect option in the SSL-VPN settings. This option allows the FortiGate to redirect HTTP requests to HTTPS port 443, which is required for Let's Encrypt to validate the domain ownership and issue a new certificate. By enabling this option, the FortiGate will be able to respond to the HTTP challenge from Let's Encrypt and renew the certificate successfully. Reference: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103437/inbound-ssl-inspection https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic


NEW QUESTION # 41
......

Exam4Docs provide training tools included Fortinet certification NSE8_812 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam. Selecting Exam4Docs can guarantee that you can in a short period of time to learn and to strengthen the professional knowledge of IT and pass Fortinet Certification NSE8_812 Exam with high score.

NSE8_812 Valid Exam Notes: https://www.exam4docs.com/NSE8_812-study-questions.html

Report this page